Stockton Products: FTM: Fascia Transition Mold

WELCOME CUSTOM FABRICATION WHATS NEW

WIRE PRODUCTS

METAL PRODUCTS

EXTRUDED PRODUCTS

SHOW ALL
Plaster Trims
Drywall Trims
- Tapeable Flanges
- Drywall Channels
Fiber Cement Panel Trims

POZALITE®

PRODUCTS SUPPORT

Stockton Products® > Metal Products

In Use

Diagram

Installation

Custom Sizes

FTM: Fascia Transition Mold

Special Sizes Available, Contact Customer Service For Details
Available With 1/8", 1/4" Vent Holes or No Vent
Available With 1/8" Weep Holes or No Weep Holes
Available in Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

Creates a fascia/soffit transition providing a small overhang to prevent moisture from migrating back to the soffit surface. Prevents water staining on plaster by creating a drip edge. Can be vented for perimeter airflow into space above the soffit.

FTM Data Sheet
FTM Installation Guide

Stockton Submittal System

Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:

More Information

Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

ASTM & Code Standards:

More Information

653-CS, A1018, A262, A36, A513, A653, A792, A924, B 370-12, B-209, B-209, B6/B69, C1047, C1063, C841, ML/SFA 920

Notes And Reference Information:

Please note not all combinations of sizes and materials may be available in stock.

Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.

Ventilation Guide

Proper Measurement: Ground and Point-To-Point

The Stockton Products Warranty

CSI Specifications

CAD Details

Safety Data Sheets (SDS)

Most Common Sizes

X Sizes	1/2", 5/8", 3/4", 7/8", 1" or 1 3/8"
Y Sizes	3/4", 1", 1 1/2", 2", 2 1/2", 3", 3 1/2", 4" or 4 1/2"
Length	120"

Most Common Part Numbers:

FTM034 138	FTM: X=3/4, Y=1 3/8, GS, 10'
FTM034V138	FTM: X=3/4, 1/8 Vent, Y=1 3/8, GS, 10'
FTM034V212	FTM: X=3/4, 1/8 Vent, Y=2 1/2 GS, 10'
FTM078V200	FTM: X=7/8, 1/8 Vent, Y=2, GS, 10'
FTM078V312	FTM: X=7/8, 1/8 Vent,Y=3 1/2, GS, 10'
FTM078V412	FTM: X=7/8, 1/8 Vent, Y=4 1/2, GS, 10'
FTM078W312LZ	FTM: X=7/8, 1/2 Weep Hole, Y=3 1/2, Z, 10'

Quote Request

To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

CALIFORNIA RESIDENTS:

Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.