Stockton Products: TRC: Tru-Corner®

WELCOME CUSTOM FABRICATION WHATS NEW

WIRE PRODUCTS

METAL PRODUCTS

EXTRUDED PRODUCTS

SHOW ALL
Plaster Trims
Drywall Trims
- Tapeable Flanges
- Drywall Channels
Fiber Cement Panel Trims

POZALITE®

PRODUCTS SUPPORT

Stockton Products® > Metal Products

In Use

Diagram

Installation

Custom Sizes

TRC: Tru-Corner®

Special Sizes Available, Contact Customer Service For Details
Available in Stainless Steel (SS) or Zinc (Z)

A solid metal trim that provides a sharp square exterior corner. Longer attachment legs help assure proper alignment to achieve a straight and true corner, particularly on irregular framing. Includes 1/4" diameter staggered key holes to aid in keying the stucco. Available in stainless steel and zinc for maximum anti-corrosive protection.

NOTE: Ground depth (X Sizes) and leg lengths (Y Sizes) can not be mixed. Sizes are as listed.

TRC Data Sheet
TRC Installation Guide

Stockton Submittal System

Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:

More Information

Stainless Steel (SS) or Zinc (Z)

ASTM & Code Standards:

More Information

All Accessories are fabricated from prime galvanized steel G90 zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69. Stainless Steel A480/A480M A580M (Stainless Steel) For installation and placement instructions refer to ASTM C1063, C841 and C926.

Notes And Reference Information:

Please note not all combinations of sizes and materials may be available in stock.

Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.

Ventilation Guide

Proper Measurement: Ground and Point-To-Point

The Stockton Products Warranty

CSI Specifications

CAD Details

Safety Data Sheets (SDS)

Most Common Sizes

	3/4" X Size with 1 3/4" Y Size in Zinc
	7/8" X Size with 1 5/8" Y Size in Zinc
	1 1/8" X Size with 1 5/8" Y Size in Zinc
	3/4" X Size with 1 3/4" Y Size in Stainless Steel
	7/8" X Size with 1 5/8" Y Size in Stainless Steel
	1 1/8" X Size with 1 7/8" Y Size in Stainless Steel
	1 3/8" X Size with 2" Y Size in Stainless Steel
Length	120"

Most Common Part Numbers:

TRC034 134SS	TRC: X=3/4, Y=1 3/4, SS, 10'
TRC034 134Z	TRC: X=3/4, Y=1 3/4, Z, 10'
TRC078 158SS	TRC: X=7/8, Y=1 5/8, SS, 10'
TRC078 158Z	TRC: X=7/8, Y=1 5/8, Z, 10'
TRC078K158SS	TRC: X=7/8, 1/8 Keyhole, Y=1 5/8, SS, 10'
TRC118 158Z	TRC: X=1 1/8, Y=1 5/8, Z, 10'
TRC118 178SS	TRC: X=1 1/8, Y=1 7/8, SS, 10'

Quote Request

To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

CALIFORNIA RESIDENTS:

Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.