Standard reveal screed for creating shadow lines/accent strips on stucco exteriors while providing crack control. Available vented for air flow.

A decorative reveal designed to butt against walls on one side while providing a plaster stop on the other. Can be used in ceiling/wall or base conditions. Available vented for perimeter air flow.

A single point reveal used at a soffit/wall condition where uneven surfaces (such as split-faced block) exist. Can be vented for perimeter airflow.

Creates a reveal at the ceiling/wall condition. Can be vented for perimeter air flow.

Provides a reveal at the soffit/wall transition. Can be vented to allow for perimeter air flow.

This pointed base screed acts as a dividing strip between plaster and other material. This base screed comes with or without 1/2 inch holes in the flange for a mechanical key.

A plaster channel screed that creates a decorative reveal with an interesting and unique appearance.

A plaster stop/casing bead in a bullnose shape that provides a decorative casing around windows and doors.

A 5/8" wide expansion joint used for crack control.

Used in various applications to finish an edge or bridge the use of dissimilar materials. Can be used to support acoustical tile.

Creates a decorative reveal at the fascia/soffit transition. Can be vented to provide air flow into the soffit. Provides a drip edge. Has return keys for screeding.

Creates a fascia/soffit transition. Provides a drip edge and can be vented for air flow into the soffit. Has a return key for screeding.

A channel screed style reveal molding with return keys for screeding. Can be vented for air flow into the soffit. Note: This product is also available in anodized aluminum.

Adjustable version of our Plaster Channel Screed that permits movement in a double stud condition. Can be vented for air flow.

Provides decorative transition between ceiling/wall condition. Available vented for perimeter air flow and has a return key for screeding.

Brown or white pre-painted galvanized. Also available in plain galvanized.

This vent is primarily utilized with plywood.

A special weep screed for those conditions where the sheer wall exceeds the foundation in plane. This special design permits the bottom leg of the weep screed to return back to the foundation.

This screed offers ventilation while providing a finished, flush surface.

This is the most frequently used casing for terminating plaster at windows and doors.

Creates a decorative reveal in the drywall. The molding is attached after the drywall is installed, minimizing labor. Can be vented to permit air flow.

Creates a decorative reveal at wall/ceiling conditions for stucco. Can be vented for perimeter air flow. Has a return key for screeding. Note: This product is also available in anodized aluminum.

Flexible Trak is designed for non-load bearing and partition walls to reduce cracking caused by ceiling deflection

Use this product when needing a straight, clean inside edge at a vertical or horizontal corner. Provides a straight edge where soffit and wall meet.

Creates a protective and decorative edge for drywall at any terminations point.

Standard plaster stop/casing bead for terminating stucco or drywall. Has a return key for finishing, and is available with weep holes.

A variation of the traditional weep screed that provides a plaster stop at the foundation line.

Drywall reveal molding used at ceiling/wall, wall/ceiling, or base conditions. Can be vented to provide perimeter air flow. Tapes in after drywall is installed.

Drywall reveal molding used at door frames and wall base conditions.

A plaster stop that terminates the stucco at the base of walls or at the fascia, or fascia/soffit conditions. Also provides a drip edge and has weep holes.

A plaster stop/casing bead used to terminate the stucco at the base of walls and/or where a plaster stop is required. Has a 60º angle which creates a unique look.

A stop used as a starting track for EIFS systems at the base of walls.

A drip screed that helps align the soffit to give it a clean, straight edge at the fascia/soffit line. 1/2" holes help "key" plaster to the molding. Available with and without weep holes.

A traditional weep screed that provides a plaster stop and functions as a weep screed at the foundation. Available with 1/2" weep holes.

Provides a termination/drip edge above exterior door and window openings with a 2" or 4" atachment flange. Note: When used as a drip edge over windows, proper flashing must be used in conjunction with this trim piece.

Used to properly seal and join two pieces of plywood.

A channel screed style reveal molding with return keys for screeding. Provides a longer leg on one side for dissimilar depths of materials, such as EIFS. Available vented. Note: This product is also available in anodized aluminum.

A plaster drip screed that helps align the soffit to give it a clean, straight edge at the facia/soffit line. Provides a unique 3/4" "flush" reveal at the fascia.

Deck Diato combines a plaster stop for conventional 3-coat stucco and pan flashing at a wall/deck condition where a plaster stop and flashing are required.

A variation on our standard reveal screed which provides a larger leg on one side for dissimilar depths of material. Available vented for air flow.

Adjustable version of our standard reveal screed for creating shadow lines/accent strips on stucco exteriors while providing crack control. Available vented for air flow.

Adjustable version of our Offset Plaster Channel Screed that permits movement in a double stud condition. Available vented for air flow.

Adjustable version of our Offset Plaster Channel Screed that permits movement in a double stud condition. Available vented for air flow.

Stucco installation guidelines require stucco to be held up off of hard scape. XLF provides an extended back leg to protect waterproof membranes.

The self-aligning, dual function M-Slide Expansion Joint provides movement capability at floor line while providing a water management system that will allow moisture to release from the top ground and lock out moisture from the bottom ground.

SSF combines a stucco screed and head flashing into one uniformed piece. Weep screed allows moisture to escape and travel over top of flashing. SSF provides ideal water management at window head, floor line and transition to dissimilar materials.

The #40 just got better. Stocktons unique hem design mitigates the concern of moisture penetration in a horizontal condition. The two-piece design allows for movement. Matching factory mitre-cut, solid-soldered inside and outside corners are available. Popular for solving water penetration and moisture management issues.

The OWC is the same as the EWC  Expansion Water-Resistant Channel except that it offers two leg lengths (x & z) for situations where two dissimilar depths come together. Popular for solving water penetration and moisture management issues. Available with and without weep holes  1/8" Holes at 4" O. C.

One-piece solid-leg design feature mitigates the concern of moisture penetration in a horizontal condition. Matching factory mitre-cut, solid-soldered inside and outside corners are available for most profiles, giving you moisture management confidence throughout the entire installation. Popular for solving water penetration and moisture management issues. Available with and without weep holes  1/8" Holes at 4" O. C. 26 gauge, G90 galvanized

One-piece solid leg design feature mitigates the concern of moisture penetration in a horizontal condition. Popular for solving water penetration and moisture management issues.

One-piece solid leg design feature mitigates the concern of moisture penetration in a horizontal condition. Popular for solving water penetration and moisture management issues.

The CSJ is designed to facilitate movement while providing a sharp, neat corner. Helps prevent cracking of stucco and plaster and neatley joins adjacent corners while allowing for movement.