Stockton Products: SPS: Single Point Screed

WELCOME CUSTOM FABRICATION WHATS NEW

WIRE PRODUCTS

METAL PRODUCTS

EXTRUDED PRODUCTS

SHOW ALL
Plaster Trims
Drywall Trims
- Tapeable Flanges
- Drywall Channels
Fiber Cement Panel Trims

POZALITE®

PRODUCTS SUPPORT

Stockton Products® > Metal Products

In Use

Diagram

Installation

Custom Sizes

SPS: Single Point Screed

Special Sizes Available, Contact Customer Service For Details
Available With 1/8", 1/4" Vent Holes or No Vent
Available Curved Upon Request
Available in Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

Single pointed vent used a at soffit/wall condition where uneven surfaces (such as split-faced block) exist providing perimeter airflow into the soffit. Available non-vented for use as a decorative reveal upon request.

SPS Data Sheet
SPS Installation Guide

Stockton Submittal System

Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:

More Information

Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

ASTM & Code Standards:

More Information

653-CS, A1018, A262, A36, A513, A653, A792, A924, B 370-12, B-209, B-209, B6/B69, C1047, C1063, C841, ML/SFA 920

Notes And Reference Information:

Please note not all combinations of sizes and materials may be available in stock.

Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.

Ventilation Guide

Proper Measurement: Ground and Point-To-Point

Radius Shape Quote Form

The Stockton Products Warranty

CSI Specifications

CAD Details

Safety Data Sheets (SDS)

Most Common Sizes

X Sizes	3/8", 1/2", 5/8", 3/4", 7/8", 1" or 1 3/8"
Y Sizes	3/4", 1", 1 1/2", 2", 2 1/2", 3", 3 1/2", 4", 4 1/2", 5", 5 1/2" or 6"
Length	120"

Most Common Part Numbers:

SPS034V200	SPS: X=3/4, 1/8 Vent, Y=2, GS, 10'
SPS034V200J	SPS: X=3/4, 1/4 Vent, Y=2, GS, 10'
SPS034V212J	SPS: X=3/4, 1/4 Vent, Y=2 1/2, GS, 10'
SPS034V300	SPS: X=3/4, 1/8 Vent, Y=3, GS, 10'
SPS034V300J	SPS: X=3/4, 1/4 Vent, Y=3, GS, 10'
SPS034V312J	SPS: X=3/4, 1/4 Vent, Y=3 1/2, GS, 10'
SPS078V112J	SPS: X=7/8, 1/4 Vent, Y=1 1/2, GS, 10'
SPS078V200J	SPS: X=7/8, 1/4 Vent, Y=2, GS, 10

Quote Request

To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

CALIFORNIA RESIDENTS:

Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.