Stockton Products: DWR: Drywall Reveal

WELCOME CUSTOM FABRICATION WHATS NEW

WIRE PRODUCTS

METAL PRODUCTS

EXTRUDED PRODUCTS

SHOW ALL
Plaster Trims
Drywall Trims
- Tapeable Flanges
- Drywall Channels
Fiber Cement Panel Trims

POZALITE®

PRODUCTS SUPPORT

Stockton Products® > Metal Products

In Use

Diagram

Installation

Custom Sizes

DWR: Drywall Reveal

Special Sizes Available, Contact Customer Service For Details
Available With 1/8", 1/4" Vent Holes or No Vent
Available Curved Upon Request
Available in Aluminum (A), Copper (C), Jet Kote (JTC), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

Creates a decorative reveal in the drywall. The molding is attached after the drywall is installed, minimizing labor. Can be vented to permit air flow. Includes key holes for proper plaster adhesion.

DWR Data Sheet
DWR Installation Guide

Stockton Submittal System

Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:

More Information

Aluminum (A), Copper (C), Jet Kote (JTC), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

ASTM & Code Standards:

More Information

All Accessories are fabricated from prime galvanized steel G90 zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69. Stainless Steel A480/A480M A580M (Stainless Steel) For installation and placement instructions refer to ASTM C1063, C841 and C926.

Notes And Reference Information:

Please note not all combinations of sizes and materials may be available in stock.

Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.

Ventilation Guide

Proper Measurement: Ground and Point-To-Point

Radius Shape Quote Form

The Stockton Products Warranty

CSI Specifications

Safety Data Sheets (SDS)

Most Common Sizes

X Sizes	1/2" or 5/8"
Y Sizes	1 1/2", 2", 2 1/2", 3", 3 1/2", 4" or 4 1/2"
Length	120"

Most Common Part Numbers:

DWR012V200	DWR: X=1/2, 1/8 Vent, Y=2, GS, 10'
DWR012V300	DWR: X=1/2, 1/8 Vent, Y=3, GS, 10'
DWR012V400J	DWR: X=1/2, 1/4 Vent, Y=4, GS, 10'
DWR058V200	DWR: X=5/8, 1/8 Vent, Y=2, GS, 10'
DWR058V300	DWR: X=5/8, 1/8 Vent, Y=3, GS, 10'
DWR058V300J	DWR: X=5/8, 1/4 Vent, Y=3, GS, 10'
DWR058V600	DWR: X=5/8, 1/8 Vent, Y=6, GS, 10'
DWR258 300A	DWR: X=2 5/8, Y=3, A, 10'

Quote Request

To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

CALIFORNIA RESIDENTS:

Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.