WELCOME   CONTACT US   CUSTOM FAB   WHATS NEW 
WIRE PRODUCTS METAL PRODUCTS EXTRUDED PRODUCTS POZALITE®
SAFETY DATA SHEETS (SDS) CALIFORNIA PROP 65 ASTM INFORMATION CSI SPECIFICATIONS CAD DETAILS BIM OBJECTS METAL MATERIALS EXTRUDED MATERIAL
 


Stockton Products® > Metal Products



In Use

Diagram

Installation

Demonstration

Custom Sizes


J-B88: Long Flange J Bead 88
  • Special Sizes Available, Contact Customer Service For Details
  • Patent Pending
  • Includes 1/2" Weep Holes
  • Available in Galvanized Steel (GS), Galvalume® (GVM) or Aluminum (A)
Similar to the new SFC88 Short Flange "Finish Rite™" plaster trim, the J-B88 Long Flange J bead provides all the same features of controlling the brown coat thickness, but has a 3 1/2" nail flange and 1/2" diameter weep holes for those conditions where a weep function is required. No more excessive plaster build up! Control your finish, control your cost! Special sizes available. Please contact us for more information.

J-B88 Data Sheet
J-B88 Installation Guide
Stockton Submittal System
Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:
More Information
Galvanized Steel (GS), Galvalume® (GVM) or Aluminum (A)

ASTM & Code Standards:
More Information
All Accessories are fabricated from prime galvanized steel G90 zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69. Stainless Steel A480/A480M A580M (Stainless Steel) For installation and placement instructions refer to ASTM C1063, C841 and C926.

Notes And Reference Information:
Please note not all combinations of sizes and materials may be available in stock.
Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.
Ventilation Guide
Proper Measurement: Ground and Point-To-Point
The Stockton Products Warranty
Safety Data Sheets (SDS)


Most Common Sizes
W Sizes
1/8" or 3/16"
X Sizes
7/8", 15/16" or 1"
Y Sizes
3 1/2"
Z Sizes
3/4"
Length
120"

Most Common Part Numbers:
J88 018K078W312 034L
J88: W=1/8, 1/8 Key Holes, X=7/8, 1/2 Weep Holes, Y=3 1/2, Z= 3/4, GS, 10'
J88 018K1516W312 034L
J88: W=1/8, 1/8 Key Holes, X=15/16, 1/2 Weep Holes, Y=3 1/2, Z= 3/4, GS, 10'
J88 018K1W312 034L
J88: W=1/8, 1/8 Key Holes, X=1, 1/2 Weep Holes, Y=3 1/2, Z= 3/4, GS, 10'
J88 316K078W312 034L
J88: W=3/16, 1/8 Key Holes, X=7/8, 1/2 Weep Holes, Y=3 1/2, Z= 3/4, GS, 10'

Quote Request
To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

Contact Information
Project Details




* Required fields.
SPAM Blocker*
Fire is? (cold or hot)
  



CALIFORNIA RESIDENTS:
Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.
©1949-2023 Stockton Products, all rights reserved worldwide. Product illustrations are for reference only. Go To Top
CornerAid®, WeepAid®, ArchAid®, StockAid®, EmberStop®, BugStop®, SolidGround®, Tru-Corner®, M-Slide Expansion Joint®, Pozalite®, SUPERIOR® Moisture Protection, FormAid®, PopOutAid™, Tru-Weep™, Vent-Rite™ and TruFlush™
are all trademarks of Stockton Products®
©1949-2023 Stockton Products, all rights reserved worldwide. Product illustrations are for reference only. Go To Top