WELCOME   CONTACT US   CUSTOM FAB   WHATS NEW 
WIRE PRODUCTS METAL PRODUCTS EXTRUDED PRODUCTS POZALITE®
SAFETY DATA SHEETS (SDS) CALIFORNIA PROP 65 ASTM INFORMATION CSI SPECIFICATIONS CAD DETAILS BIM OBJECTS METAL MATERIALS EXTRUDED MATERIAL
 


Stockton Products® > Metal Products



In Use

Diagram

Installation

Custom Sizes


PWC: Plaster Water-Resistant Channel
  • Special Sizes Available, Contact Customer Service For Details
  • SUPERIOR® Moisture Protection
  • SolidGround® Design For Moisture Protection
  • Available With 1/8" Weep Holes or No Holes
  • Available in Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)
One-piece SolidGround® design feature mitigates the concern of moisture penetration in a horizontal condition.

NOTE: For Y Sizes over 2", use extruded aluminum or OWC.
PWC Data Sheet
PWC Installation Guide
Stockton Submittal System
Note: This Installation Guide is supplied solely to assist in the selection and application of product manufactured by Stockton Products. This drawing is generic in nature and should not be used in design or construction without an independent evaluation by a qualified Architect or Engineer of Record.

Materials And Finishes:
More Information
Aluminum (A), Copper (C), Galvanized Steel (GS), Bonderized (BN), Galvalume® (GVM), Stainless Steel (SS) or Zinc (Z)

ASTM & Code Standards:
More Information
All Accessories are fabricated from prime galvanized steel G90 zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69. Stainless Steel A480/A480M A580M (Stainless Steel) For installation and placement instructions refer to ASTM C1063, C841 and C926.

Notes And Reference Information:
Please note not all combinations of sizes and materials may be available in stock.
Not all X Sizes (Depth), Y Sizes (Reveal) and material combinations may be possible.
Ventilation Guide
Proper Measurement: Ground and Point-To-Point
The Stockton Products Warranty
CSI Specifications
CAD Details
Safety Data Sheets (SDS)


Most Common Sizes
X Sizes
5/8", 3/4", 7/8", 1" or 1 3/8"
Y Sizes
3/4", 1", 1 1/2" or 2"
Length
120"

Most Common Part Numbers:
PWC034 112
PWC: X=3/4, Y=1 1/2, GS, 10'
PWC034 034
PWC: X=3/4, Y=3/4, GS, 10'
PWC034 200
PWC: X=3/4, Y=2, GS, 10'
PWC034W034
PWC: X=3/4, 1/8 Weep Holes, Y=3/4, GS, 10'
PWC034W200
PWC: X=3/4, 1/8 Weep Holes, Y=2, GS, 10'
PWC038W200
PWC: X=3/8, 1/8 Weep Holes, Y=2, GS, 10'
PWC058 034A
PWC: X=5/8, Y=3/4, A, 10'
PWC078 100
PWC: X=7/8, Y=1, GS, 10'

Quote Request
To receive a no obligation quote simple fill out the form below. If you prefer, fell free to call customer service for assistance.

The more details you can give us, the better we can quote your request. Please send us any drawings or sketching you might have. We welcome custom projects and request, so fell free to let us know what your really look for. You can fax your drawing to (925) 454-9710 or eMail it to custom@stocktonproducts.com.

Stockton Products' are only sold through authorized distributors. If you are not a dealer please indicate your preferred dealer and/or Stockton sale rep on the form below.

Contact Information
Project Details




* Required fields.
SPAM Blocker*
Fire is? (cold or hot)
  



CALIFORNIA RESIDENTS:
Please review our Prop 65 statement or visit www.P65Warnings.ca.gov.
©1949-2023 Stockton Products, all rights reserved worldwide. Product illustrations are for reference only. Go To Top
CornerAid®, WeepAid®, ArchAid®, StockAid®, EmberStop®, BugStop®, SolidGround®, Tru-Corner®, M-Slide Expansion Joint®, Pozalite®, SUPERIOR® Moisture Protection, FormAid®, PopOutAid™, Tru-Weep™, Vent-Rite™ and TruFlush™
are all trademarks of Stockton Products®
©1949-2023 Stockton Products, all rights reserved worldwide. Product illustrations are for reference only. Go To Top